Configuring the MaxTester DSL Test Set
20
³
DHCP Server
enables the dynamic host configuration protocol (DHCP) mode
for the LAN side of the connection.
³
Platform Ip Address
displays the IP address of the unit’s platform when the
DHCP Server
is disabled.
To configure LAN setup values:
1.
Press the up/down arrows to select the desired parameter.
2.
Press the left/right arrow keys to view and select the options.
3.
If you make any changes to the parameter values, press the on-screen function
keys to save or cancel your input.
Select Tests
The
Select Tests
page allows you to
Enable
/
Disable
the
following optional sub-tests, within the 3 types of test
applications.
³
IPTV Test
- when enabled, all other sub-tests are
automatically disabled.
³
Ping
is also known as ICMP echo request and
determines network connectivity and accessibility.
³
FTP
test verifies the file transfer speed of the file
download and upload.
³
Traceroute
is a complement tool of the Ping test to
determine why a destination cannot be reached, or
where the internet is broken.
³
Web Browser Tes
t can only be started when a WAN
connection (either through xDSL or Ethernet) has
been established.
When enabled, the sub-tests’ test pages are available in the results pages.
When highlighted, the sub-tests’ setup contents are shown on the
Test Setup
tab.
Note:
Select Tests
and
Test Setup
tabs are not available in
Sync Only
and
Bridged
Access Modes
.
To select sub-tests:
1.
Press the up/down arrows to highlight the desired test.
2.
Press the left/right arrow keys to toggle between
Enable
/
Disable
.
OR
3.
Press
on any value to open the list box to toggle between
Enable
/
Disable
.
