EXFO EXFO MaxTester DSL User Manual Download Page 34

Page: 34 / 58

MaxTester DSL Test Results

Ethernet Connection Summary

When set up over Ethernet, the available test results are the following:

WAN

LAN Port Line Status

displays either Connected

or Disconnected for the particular line connection
under test.

WAN

LAN Port LinkSpeed

is a choice between AUTO

(negotiated during the link establishment), 100 or
10 Mbps.

WAN

LAN Port ConnectMode

Full-Duplex

Half-Duplex

, when Link Speed is set to either 100 or

10 Mbps.

The total number of

Received

and

Transmitted

Bytes

Packets

, and

Ethernet

Errors

are also

displayed during the test.

WAN Status

The

WAN Status

tab allows you to view the status of the connection between the

WAN port of the unit and the ISP.

WAN Access

specifies the encapsulation method used

by the network and consists of the following types:

PPPoE

is point-to-point protocol over Ethernet.

PPPoA

is point-to-point protocol over ATM.

DHCP

is Dynamic Host Control Protocol which is

used to dynamically assign an IP address for the
client node on the network.

Static IP

is the current location assigned by the

service provider or user.

IPoA

stands for classical Internet Protocol over

ATM.

WAN Status

value changes as per current WAN Status.

Assigned IP

displays IP address information assigned

to the unit that is connected to the network.

Gateway

is the IP address of the default gateway.

Subnet Mask

is the network address used to identify if the IP address is within

the same WAN.

DNS1

is the address of the primary domain name server to be used by the unit.

DNS2

is the address of the secondary domain name server to be used by

the unit.

VPI

is the virtual path identifier value. Not available in PTM mode.

VCI

is the virtual circuit identifier value. Not available in PTM mode.

Summary of Contents for EXFO MaxTester DSL



























































Search results

Summary of Contents for EXFO MaxTester DSL

Reviews:

Brands by name

Popular brands

EXFO EXFO MaxTester DSL, User Manual

Search results

Summary of Contents for EXFO MaxTester DSL

Reviews:

Brands by name

Popular brands