ASSEMBLY
INSTRUCTIONS
Step A:
Turn the
Spring Knob (23
) in a counterclockwise direction and then pull it to set down the
Main Frame (1)
on the floor. Turn the
Spring Knob (23)
clockwise to secure the treadmill in the folding down position.
First remove four
Stabilizer Knobs (32)
and
Washers (74)
from the right and left sides of
Stabilizer (57)
.
Then insert the both
Stabilizer Tubes (30)
into the tubes of
Stabilizer (57)
and secure them with four
Stabilizer Knobs (32)
and
Washers (74)
that were removed.
Step B:
Pull the
Short Knob (63)
, and then lift the
Handlebar (68)
all the way up. Tighten the
Handlebar (68)
to the
Stabilizer (57)
with two
Handlebar Knobs (67)
and
Washers (73)
.
Step C
:
Connect the
Mode Button Wire (64)
,
Speed Button Wire (62)
, and
Sensor Cable (33)
to the wires that
come from the
Computer (70)
. Attach the
Computer (70)
onto the
Handlebar (68)
with two
Computer Knobs (69)
.
Install the
Safety Tether Key (65)
onto the
Computer (70)
.
Step D
:
There are five
Adjustable Pads (28)
on the bottom of both
Stabilizer Tubes (30)
and
Stabilizer (57)
. You can adjust
the
Adjustable Pad (28)
, if the floor is not level.
8
23
A
D
B
C
65
70
68
62 69
33
69
64
67
67
68
57
63
73
73
32
30
57
1
28
28
28
57
30
74
