11
Step 3:
When the exercise has stopped, and all buttons have not been operated for over 4 minutes, the monitor display shows
the clock time and room temperature, this is the
sleep mode
. At this moment, other functions are off.
(figure 6)
.
All previous preset data and training data are kept, and will show up when any buttons are pressed or the exercising
starts up again in the sleep mode.
Step 4:
. When the safety key is not installed and pressing the
START/STOP
button has failed, the system will automatically
stop. If the safety key is not positioned during exercising the motor speed will slow down to 0.
Step 5:
When the motor speed has exceeded 3m/h to the preset speed during exercising, press the
STOP
button and
check, the speed has to be slowed down to 0 in 30 seconds. If not, the monitor will show
E1,
an error sign as
reminder to the user. The monitor starts to beep continuously till the AC power is switched off manually and then the
motor will stop too.
(figure 7)
Step 6:
When the initial speed or preset speed has been started in 30 seconds and the motor's speed is under preset
speed 3 m/h, the system will stop. Once its starts for 15 seconds, if
SPEED
=0, the monitor will show blinking
E-2
which is another error sign. The monitor starts to beep continuously till the AC power is switched off manually then the
motor will stop
(figure 8)
.
COMPUTER
OPERATION
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8