26
6. PROBLEM:
High Tension on all settings
a. SOLUTION:
Remove the
Console Cover (86)
to verify that the
Tension Control Knob (13)
is properly connected to the
Tension Cable (93)
. If not, un-hook the cables and reinstall the
Tension Control Knob (13)
. (See Diagram Below)
b. SOLUTION:
Make sure part
Clip (108)
is removed. (See Diagram Below)
c. SOLUTION:
Turn the tension knob to tension level one, then pull the
Tension Control
Knob (13)
cable up as high as you can, this will reset the tension.
MAINTENANCE & TROUBLE SHOOTING
If you need further assistance, contact our Customer Service.
Summary of Contents for 525XLR
Page 5: ...3 LABEL PLACEMENTS...
Page 8: ...6 OVERVIEW DRAWING...
Page 11: ...9 HARDWARE TOOLS PACK...
