17
Step 8
8a Console pre-installation:
Insert the
Console Bracket (69)
onto the
Console Support Tube
(87),
but do not secure. Remove the
Console Cover (86)
.
8b Tension Cable Installation
: Adjust the tension to the highest level on the
Console (88)
to give
slack to the tension cable. Thread and hook the cable from the backside of the
Tension Control
Knob (13)
into the metal hook at the end of the
Tension Cable (93)
. Slide the same cable into the
slot at the end of the
Tension Cable (93)
. Remove the
Clip (108)
after having threaded the cable.
Refer to diagram
AA-5
& AA-6
. If the threading of the
Tension Cable (93)
is correct, then it should
look like
Figure AA-7
.
Note:
Take out the
Pin (107)
and adjust the
Console Support Tube (87)
for easier installation.
ASSEMBLY
Summary of Contents for 525XLR
Page 5: ...3 LABEL PLACEMENTS...
Page 8: ...6 OVERVIEW DRAWING...
Page 11: ...9 HARDWARE TOOLS PACK...
