6.2 Authorised maintenance
Maintenance or repairs described in this chapter must not be handled by the
user, unless approved by Exero Technologies. This type of maintenance must be
handled by people approved by Exero Technologies. If such maintenance is
required we ask the owner of the product to contact Exero Technologies for
procedure.
6.2.1 Damaged parts
If you find cracked or worn parts on Spike, or parts that no longer function as
intended, contact Exero Technologies for maintenance or repair.
6.2.2 Steering maintenance
We recommend regularly giving the steering system a full service. This requires a
specialist and must be done by authorised personnel. Contact Exero
Technologies for more information.
6.3 Storage and transport
Spike should be stored in a dry environment avoiding direct sunlight, either
indoors, in a garage or shed when not in use. Ensure that Spike is clean and dry
before storing. The brakes will not handle temperatures lower than -15 degrees
and higher than 55 degrees celsius, and pressure washing is prohibited on the
entire product,
Spike can be compacted, something very practical for storage and transport, see
chapter 6.4. When compacting Spike the provided strap must be attached, see
figure 6.4. The strap must be attached around the seat arm and mainframe so
it’s positioned well under transport. This is to avoid trapping fingers and
unnecessary wear on the product.
61
Summary of Contents for Spike Kneeled
