Excy Bed Bike, Owner'S Manual

Page: 4 / 21

Set-Up
www.excy.tips
Opening, Closing, and Locking the System
The Excy Bed Bike was designed to open and close for easy storage and transport.
Simply grab the Front and Rear and pull them apart to your desired height. To close your
Excy Bed Bike, make sure the Clevis Pin is removed, pivot the Rear downward and close
completely.
*WARNING:​ Avoid pinch points when opening, closing, and locking the system
Height Adjustment Positions
The Excy Bed Bike can be adjusted to three heights (without the Clevis Pin, the Clevis
Pin placed in the first or second hole). It is not advised to use the Top Hole as the
system then becomes top-heavy. Always remove the Clevis Pin for standing and body
weight positions. The Clevis Pin is used in coordination with the Locking Holes to
secure workout positions. Once the Clevis Pin is inserted into the Clevis Pin Holes,
rotate the Clevis Spring to the other slide and clip it over the end of the pin.
*WARNING​: Do not stand or place body weight on the Excy Bed Bike unless the pin is
fully removed and the Excy is placed in its lowest position (weight limit 220 lbs for these
positions).
3