Excera EP3120 U1, User Manual

Page: 8 / 19

8 7
BATTERY INFORMATION
WARNING:
▼ Do not short circuit battery terminals.
▼ Never attempt to remove the casing from the battery pack.
▼ Never assemble the battery in dangerous surroundings, spark may cause explosion.
▼Do not put the battery in hot environment or throw it into fire, it may cause explosion.
PREPARATION
Installing / Removing the Battery
1. Match the two grooves of the battery pack with
the corresponding guides on the back of the
transceiver, and then push it.
2. Press the battery pack until the release latch on
the top of the transceiver locks. After hearing a
“click” sound, the battery has been locked.
3. To remove the battery pack, slide up the release
latch and remove the pack away from the
transceiver.
Installing / Removing the Antenna
■
Installing the Antenna:
Screw the antenna into the connector on the top of
the transceiver by holding the antenna at its base
and turning it clockwise to secure it.
■
Removing the Antenna:
Turn the antenna anticlockwise to remove it.