—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
– This radio is designed for and classified as “Occupational/Controlled Use Only” , meaning it must be used only during
the course of employment by individuals aware of the hazards, and the
ways to minimize such hazards; NOT intended for use in a General population/uncontrolled environment
– DO NOT operate the radio without a proper antenna attached, as this may damage the radio and may
also cause you to exceed RF exposure limits. A proper antenna is the antenna supplied with this radio by
the manufacturer or an antenna specifically authorized by the manufacturer for use with this radio, and the
antenna gain shall not exceed 3.5 dBi by the manufacturer declared.
– DO NOT transmit for more than 50% of total radio use time, more than 50% of the time
can cause RF exposure compliance requirements to be exceeded.
– During operation, the separation distance between user and the antenna shall be at least 50 cm, this separation
distance will ensure that there is sufficient distance from a properly installed externally-mounted antenna to satisfy the RF
exposure requirements
– During transmissions, your radio generates RF energy that can possibly cause interference with other
devices or systems. To avoid such interference, turn off the radio in areas where signs are posted to do
so. DO NOT operate the transmitter in areas that are sensitive to electromagnetic radiation such as hospitals, aircraft,
and blasting sites.
Summary of Contents for EM8100
Page 1: ...M M ...
Page 52: ......
