Excera EM8100 User Manual Download Page 15 | Manualshive

Page: 15 / 52

background image

9

●

When your radio is successfully connected to a Wireless

PTT , the Wireless PTT connected icon appears on

the status bar.

●

When your radio is successfully connected to a Bluetooth

headset, the Bluetooth headset connected icon

appears on the status bar.

●

When your radio is successfully connected to a Bluetooth

headset and a Wireless PTT , the Bluetooth headset and

Wireless PTT connected icon appears on the status

bar.

When the Bluetooth feature is enabled, the Bluetooth icon
appears on the status bar. You can find a Bluetooth device by
using the Search Devices menu and connect it to your radio.

To access this item, press the

Setting

key in the home

screen and then select "Accessories -> Bluetooth".

With the Bluetooth Information option, you can view Bluetooth
headset connection status, Wireless PTT connection status,
local Bluetooth address, Bluetooth name, and Bluetooth
version.

Note:

●

If your radio cannot connect to the Bluetooth device,

make sure the device is in pairing mode and then try to
connect your radio to the Bluetooth device via the radio
menu.

●

If your radio fails to connect to the Bluetooth device and

the device is in pairing mode, disable and then enable
the Bluetooth feature via the radio menu, and search a
Bluetooth device and connect your radio to this device
via the radio menu.

■

Bluetooth

This feature allows you to use your radio with a Bluetooth
-enabled device (such as Bluetooth headset and Wireless
PTT) via a Bluetooth connection.

Note:

This function is applicable to some radios.

For details, contact your local dealer.

Menu Navigation

«
...
13
14
15
16
17
...
»

Summary of Contents for EM8100





















































Reviews:

No comments

Related manuals for EM8100

Brand: MicroTalk Pages: 10

Brand: Bushnell Pages: 9

Brand: Grundig Pages: 8

Brand: Laser Pages: 8

Brand: C. Crane Pages: 32

GigaBeam GBE-LR

Brand: Ubiquiti Pages: 24

Brand: Teac Pages: 8

Brand: EisSound Pages: 21

Brand: C. Crane Pages: 35

Viking VM600 Series

Brand: E.F. Johnson Pages: 188

Brand: Seg Pages: 111

StreamCaster 4000 Series

Brand: Silvus Pages: 155

Brand: Vega Absolute Pages: 17

Brand: Raveon Pages: 40

Micropilot FMR66B

Brand: Endress+Hauser Pages: 52

Brand: Kirisun Pages: 76

Brand: Vertex Standard Pages: 63

Brand: DNT Pages: 104

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands