30
10.3 Pad replacement
If the working speed reduces, or the result becomes less, then the pad may be severely soiled
or worn and should be replaced. The pad is attached to the eccentric plate with Velcro. Do the
following steps:
• Turn off the machine.
• Remove the plug from the socket.
• Set the handle with T-handlebar to the highest position.
• Tilt the machine backwards so that the handlebar is on the floor and the pad is vertical.
• Pull the pad from the eccentric plate.
• Attach the new pad carefully to the eccentric plate and then push it firmly in place.
• Put the machine in upright position again.
• Put the plug in the socket.
• Turn the machine on and you are ready to work again.
11. MALFUNCTIONS
1) The machine does not start:
• Check the earth leakage circuit breaker.
• Check the power supply.
• Check the cables for damage.
• Contact your supplier.
2) The machine makes a rattling sound:
STOP IMMEDIATELY! CHECK FIRST!
• A nut has vibrated loose from the ballast plates.
• A rubber from the pad holder is loose.
• The eccentric bearing is worn.
3) The adjustment mechanism of the handle does not work:
• The locking pin is bent.
• The spring is broken.
12. GUARANTEE TERMS & CONDITIONS
The machine is subject to a guarantee period of 6 months after delivery, in accordance with
Metaalunie conditions. These conditions stipulate that, within this period, only equipment and
manufacturing errors will be repaired free of charge, AFTER BEING EVALUATED BY EXCENTR.
Transport and or travel costs must be paid by the customer.
