21
EXCENTR 55-35
1. INTRODUCTION
Congratulations on the purchase of this floor preparation machine that can be used to clean,
strip, polish, sand and remove paint, coatings, glue residues, etc. You now possess a machine
produced using the very latest technology, which you will be able to use for many years without
malfunction, as long as you use it in the correct manner.
The purpose of this manual is to familiarize you with the operation, to instruct you on safe
working practices, and to provide periodic maintenance guidelines. Make sure you are familiar
with the contents of this user manual before you start working with the machine, so you can
fully and safely use all of the machine’s features.
This user manual, the type plate and the safety stickers placed on the machine feature important
safety-related information and are thus an integral part of the delivery. If damaged or lost, they
must be re-applied or supplied once again. These items can also be resupplied by your dealer.
The machine is delivered completely assembled and is ready to scrub/sand/polish. Make sure
that you are experienced in doing these types of work before you start. Upon delivery you will
get complete oral instructions on how to operate the machine, the safety instructions and
the necessary maintenance. If this is not possible, then the buyer is responsible for the correct
instruction.
The machine offers many possibilities to process a floor. Excentr offers various trainings to get
the most out of the machine. Visit www.excentr.com for a training location near you.
2. GENERAL DESCRIPTION
The Excentr 55-35 is designed to easily clean edges, corners and smaller spaces. The 55-35 can
also be used to strip or grind/polish parquet floors with the use of special pads (without use of
chemicals!). The plastic bumpers on all sides enable you to accurately work in corners.
What makes the 55-35 unique is the so-called Excentr method: the high velocity of 2800
movements per minute. This results in an unmatched operation of the pad. The machine gives
you the feeling that it ‘floats’ across the floor, which makes it easy and relaxed to handle the
machine during operation.
The base of the machine is a robust stainless steel frame with a set of wheels to which the
pad holder with vibrating rubbers is attached. A robust eccentric electro motor is attached to
the frame and drives the pad holder. Extra weights have been applied on the machine to keep
sufficient pressure on the pad.
EN
