Function List
Parameter and Function List
Item Function Function Set range & function Factory
code explanation Setting
CD065 Analog input select 0:~10V 1:0~5V
2:0~20mA 3:4~20mA 0
4:0~10V plus 4~ 20mA
CD066 Lower analog frequency 0.00~400.00Hz 0
set point
CD067 lower analog frequency 0:Positive
bias direction 1: negative
CD068 Higher analog frequency 0.00~400.00Hz 50.00
set point
CD069 Higher analog frequency 0: positive
bias direction 1: negative 0
CD070 Negative bias reverse 0:invalid 1:vaild 1
select
CD071 Analog output gain 0.0~100.0% 100
CD072 Up/down function select 0:recoreded 1
1: non-recoreded
CD073 Reserved
Cd075
0: normal running 0
1: external control four speed
Cd076 PLC mode select 2: external control multi
speed3:ddistrubance 4:inner
control multi speed
0: stop after one circle 0
1:cirulating running 2: stop after
auto running one circle (with
CD077 Auto PLC select STOP interval ) 3: auto
circulating running
(with STOP interval)
CD078 PLC running direction 0~255(0:Positive 1: Negative )
CD079 PLC accel/decel .time 0~65535
CD080 Multi-speed 2 0.00~400.00 Hz 15.00
CD081 Multi-speed 3 0.00~400.00 Hz 20.00
CD082 Multi-speed 4 0.00~400.00 Hz 25.00
CD083 Multi-speed 5 0.00~400.00 HZ 30.00
CD084 Multi-speed 6 0.00~400.00 Hz 35.00
CD085 Multi-speed 7 0.00~400.00 Hz 40.00
CD086 Multi-speed 8 0.00~400.00 Hz 0.50
CD087 Timer 1 0.0~6500.0s 10.0
CD088 Timer 2 0.0~6500.0s 10.0
CD089 Timer 3 0.0~6500.0s 0.0
CD090 Timer 4 0.0~6500.0s 0.0
CD091 Timer 5 0.0~6500.0s 0.0
CD092 Timer 6 0.0~6500.0s 0.0
CD093 Timer 7 0.0~6500.0s 0.0
CD094 Timer 8 0.0~6500.0s 0.0
CD095 Reserved
CD0119
16
I/P
&
O
/P
te
rm
in
a
ls
