28
29
You will need to to descale the device at least once a year, or more often depending on the number of shower
cycle and the water quality environment.
During the descaling procedure, you can continue to use the toilet without the shower functions.
The descaling procedure lasts up to 30 minutes. During this time, the red LED light always flashs and the
device makes a sound. Once the red LED switches off, the spray functionlity is once again ready for operation.
Please use the descaling agents of less foam.
The water and power must be cut before
you disassemble the E-Bidet.
Do not invert or tilt it before you finish
draining the water tank.
Descaling the device
Drain the water tank
Damage to human body and the device from aggressive descaling agents.
Then it will start the descaling procedure.
During the descaling procedure, you can
continue to use the toilet without the
shower funcions.
It will last for about half an hour. During
this time the LED of knob will be flashed.
Once the LED stop flashing and resume
breathing light ,and with a long „BI”, the
spray functionality is once again ready
for operation.
Close the rubber cover
and descaling cover.
Open the
descaling cover
Open the cover and seat.
Pour descaling agents.
Dosage: about 150ml.
Open the rubber cover.
Notice
Hold the plug with the tipper, turn to
„OPEN”, and pull out. It will start to drain.
After completing the drainage, insert
the plug and turn to „CLOSE”.
Danger
1
3
2
4
5
6
Notice:
There is water
flow from the
nozzle at this time.
EN
EN
