EXCELL PRECISION CO., LTD.
02018058
7
ZSME300000317
Low Power Alarm
Please note when the ( ) symbol keeps flashing on the left down corner of the
display, the batteries should be recharged.
The scale will turn off automatically after a few hours when the low battery warning symbol
shows up. The scale must be fully recharged, before operating again.
Please recharge at once when the symbol shows in order to keep the weight
accuracy.
1-5 Error Messages
⇒
Weight exceeds 9d of maximum capacity. (d=division)
⇒
Zero value after power on is over +10% FS.
⇒
Zero value after power on is less than -10% FS.
⇒
Unstable zero return, unstable over 10 sec. Press
to leave E4.
⇒
Zero is too high when calibrating. (over internal value350,000)
⇒
Zero is too low when calibrating. (under internal value 80,000)
- - - - - -
⇒
If the negative weight is over 20 divisions and there is no T or PT, the display
shows “- - - - - -”
Summary of Contents for ZSME300000317
Page 2: ......
