EXCELL PRECISION CO., LTD.
0201810X
ZSME300000292
8
Press
key 2 times
the display shows
.
Press
key 4 times
the display shows
.
Preset “High limit” ( High limit
Low limit )
e.g. High limit = 25 kg
Press
key 1 time
the display shows
.
Press
key 1 time
the display shows
.
Press
key 2 times the display shows
.
Press
key 1 time
the display shows
.
Press
key 5 times the display shows
.
Press
key 3 times
the display shows
.
Preset “Beeper value” ( Refer to
Note
)
e.g. Beeper value = 22
Press
key 1 time
the display shows
Press
key 2 times
the display shows
Press
key 1 time
the display shows
Press
key 2 times
the display shows
Press
key 1 times
the display shows
.
Preset Single point (preset low limit only):
After “preset low limit” procedures is completed and the display shows
.
, then press
key again, the display shows
.
. This means that the
“preset single point” procedure is completed.
NOTE
_ _ _
x
x
A
B
A
Setting for the status that LCD is on and the beeper beep:
0 = when stable, the beeper beeps and LCD is on.
1 = when stable, the beeper beeps; whether stable or not, LCD is on.
2 = whether stable or not, the beeper beeps and LCD is on.
3 = open warning device: when the weight is higher than HI value and the
weight is stable, LCD is on and Relay Card open.
B
Setting for the beep status:
0 = No beep
1 = OK (when the weight is over Low Limit & under or equal to High Limit.),
the beeper beeps.
2 = When the weight is under or equal to Low Limit & over High Limit, the
