EXCELL PRECISION CO., LTD.
0201810X
ZSME300000292
19
5. Press
key to restart the printer.
3-3 F6 Exit Function
Use
or
to select F6. Then press
to count down to zero and exit the
setting.
3-4 F7 Internal Value Display Mode
Use
or
to select F7. Then press
to display internal value. Press
again will see F7.
3-5 F8 Weight Hold Mode Setting
Use
key or
key choose F8
Before setup, please switch the SWA1 on
MINI JUMPER to ADJ position
After setup, please switch the SWA1 on
MINI JUMPER back to LOCK position
In hold mode, press
key, to print the
hold value as shown on display.
(It’s not related to the settings of F5
transmission mode, but it needs to select the
proper Baud rate according to the
transmission of the receiver.)
(To setup transmission rate, please refer to
F5 RS-232 Interface Output Setting (option))
Use
key to select a value from hold 0 ~
hold 5 and then press
key to complete
setup.
Press
key Press
key
Press
key Press
key
Press
key
Press
key
good word space
word space too low
please adjust it to a higher value
