background image

20- ENG 

A14687

LIMITED WARRANTY

ONE YEAR LIMITED WARRANTY ON PRODUCT COMPONENTS EXCLUDING IC2 PUMP
Black & Decker (U.S.) Inc. warrants to the original purchaser that the frame, wheels, 
gun, hose, wand, spray nozzle(s) and other components (excluding the IC2 pump) of the 
Excell pressure washers covered under this warranty are free from defects in material and 
workmanship for one year from the date of purchase.
TWO YEAR LIMITED WARRANTY ON IC2 PUMP
Black & Decker warrants to the original purchaser that the IC2 pump of the Excell pressure 
washers covered under this warranty is free from defects in material and workmanship 
for two years from the date of purchase. The two year limited warranty applies to the IC2 
pump only.
Black & Decker will repair or replace, at Black & Decker option, products or components 
which have failed within the above warranty periods.  Service will be scheduled according 
to the normal work fl ow and business hours at the service center location, and the 
availability of replacement parts.  All decisions of Black & Decker with regard to this limited 
warranty shall be fi nal.
This warranty gives you specifi c legal rights, and you may also have other rights which 
vary from state to state.
RESPONSIBILITY OF ORIGINAL PURCHASER (Initial User):
• 

To process a warranty claim on your Excell pressure washer, return it to the place of 
purchase.

• 

Retain original cash register sales receipt as proof of purchase for warranty work.

• 

Use reasonable care in the operation and maintenance of the product as described in 
the Owners Manual(s).

THIS WARRANTY DOES NOT COVER:
• 

Merchandise sold as reconditioned, used as rental equipment, or fl oor or display 
models.

• 

Merchandise that has become damaged or inoperative because of ordinary wear, 
misuse, cold, heat, rain, excessive humidity, freeze damage, use of improper 
chemicals, negligence, accident, failure to operate the product in accordance with the 
instructions provided in the Owners Manual(s) supplied with the product, improper 
maintenance, the use of accessories or attachments not recommended by Black & 
Decker, or unauthorized repair or alterations.

• 

Repair and transportation costs of merchandise determined not to be defective.

• 

Costs associated with assembly, required oil, adjustments or other installation and 
start-up costs.

• 

Expendable parts or accessories supplied with the product which are expected to 
become inoperative or unusable after a reasonable period of use, including but not 
limited to springs, nozzles, o-rings, washers, and similar accessories.

• 

Merchandise sold by Black & Decker which has been manufactured by and identifi ed 
as the product of another company, such as gasoline engines.  The product 
manufacturer’s warranty, if any, will apply.

• 

ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE, OR 
EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR MALFUNCTION 
OF THE PRODUCT IS NOT COVERED BY THIS WARRANTY. 
 Some states do not 
allow the exclusion or limitation of incidental or consequential damages, so the above 
limitation or exclusion may not apply to you.

• 

IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY OR 
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR FROM 
THE DATE OF ORIGINAL PURCHASE. 
 Some states do not allow limitations on how 
long an implied warranty lasts, so the above limitations may not apply to you.

Summary of Contents for Excell XR2625





















Reviews: