background image

5 - ENG

A14687

  

 

RISK OF UNSAFE OPERATION

WHAT CAN HAPPEN

HOW TO PREVENT IT

 • Unsafe op 

er a tion of your pressure 

wash er could lead to se ri ous in ju ry 
or death to you or others.

  •  Do not use chlorine bleach or any 

other corrosive compound.

 • Be 

come fa mil iar with the op er a tion 

and con trols of the pressure washer.

  •  Keep operating area clear of all 

persons, pets and obstacles.

  •  Do not operate the product when 

fatigued or under the influence of 
alcohol or drugs. Stay alert at all 
times.

  •  Never defeat the safety fea tures of 

this prod uct.

  •  Do not op er ate machine with 

missing, broken or un au tho rized 
parts.

  •  Never leave wand unattended while 

unit is running.

  •  If proper starting procedure is not 

followed, engine can kickback 
causing serious hand and arm injury.

  •  If engine does not start after two 

pulls, squeeze trigger of gun to 
relieve pump pressure. Pull starter 
cord slowly until resistance is felt. 
Then pull cord rapidly to avoid 
kickback and prevent hand or arm 
injury.

  •  The spray gun/wand is a powerful 

clean ing tool that could look like a 
toy to a child.

 • Keep chil 

dren away from the 

pressure washer at all times.

  •  Reactive force of spray will cause 

gun/wand to kickback, and could 
cause the op er a tor to slip or fall 
or misdirect the spray. Im prop er 
control of gun/wand can re sult in 
in ju ries to self and others.

  •  Do not over reach or stand on an 

unstable support. 

  •  Do not use pressure washer while 

standing on a ladder. 

  •  Grip gun/wand firmly with both 

hands. Expect the gun to kickback 
when triggered.

Summary of Contents for Excell XR2625





















Reviews: