Page | 9
OPERATION INSTRUCTIONS
1. Plug in the device, and press the power switch to the position of I : ON, the
device will sound 1 beep and the heat status lamp will turn blue. The device is
now in standby mode and
won’t
emit any heat.
2. Point the remote control directly to the receiver, press the
“ON”
button, the
device will sound 1 beep and the heat lamp will turn red. The device will start
to heat in high power mode (100% the rated power)
Press the
“OFF”
button again, the device will sound 1 beep and the heat status
lamp will turn blue. The device will stop heating and will stay in stand-by mode.
