Page | 15
INSTALLATION PROCESS
WARNING! Mounting of the infrared heater and its connection to the electric
mains should be carried out only by qualified specialists according to the
Electrical Installation Regulations and Power System Safety Standards
1. Open the box and carefully take the heater out.
2. Take out the packing paper sheet from the end of heater
3. Take out one pair of
mounting
Brackets.
These adjustable brackets are for wall
or ceiling mount, and come with preset angle options of parallel, 15°, 30°, 45° and
height 170mm.
4. The correct installation process, is as per the diagram above, select the heater
location on the wall/ceiling by locating the stud or structural beams to ensure
secure fastening of the heater, whilst observing the minimum clearances from the
floor and other objections.
