User manual
Excel Navigator
Page 15
The Navigator chair
The chair of the Navigator is equipped with a number of adjustment possibilities which improves your
seat and driving comfort considerably. The entire chair can be height adjusted in a range of 10 cm in 4
teps of 2,5 cm. This adjustment can be done by your dealer.
Adjust backrest angle
The backrest angle is stepless adjustable in a sitting position up to standard 105 degrees (picture 37). By
replacing the hex bolt on the turning point this can be increased up to 135 degrees. The backrest can
also be fully flipped forward to ease transport. On the right side of the chair (left shown on picture 37) is
a lever. Pull it up and lean forward or rearward to adjust the desired backrest angle (picture 37). As
soon as you reached it you release the lever> The backrest will fixate in your position.
Picture 37
Never operate the lever when you are not in the chair. The backrest will come forward with strength.
Adjust lumbar support
The chair is equipped with a lumbar adjustment in 4 steps, adjustable through a turning knob on the side
of the backrest. This creates more or less support in the lower back. After adjusting position 4
(maximum) the adjustment automatically falls back in position 1 (minimum) when the knob is turned
further (picture 38).
Picture 38
