User manual
Excel Navigator
Page 11
NUMBER OF
BLINKS
FAULT
SCOOTER
CONDITION
REMARKS
1
Charge battery
DRIVING POSSIBLE BATTERY VOLTAGE LOWERED TO LESS
THAN 23.3 V, CHARGE BATTERIES SOON
2
Battery voltage too low
DRIVING NOT
POSSIBLE
BATTERY VOLTAGE LOWERED TO LESS
THAN 16.5 V, CHARGE BATTERIES
IMMEDIATELY
3
Battery voltage too high
DRIVING NOT
POSSIBLE
BATTERY VOLTAGE INCREASED TO HIGHER
THAN 32 V. PROBABLY DEFECT CHARGER
4
Current time limit out
DRIVING NOT
POSSIBLE
DETECTOR DETECTED SHORTCUT IN THE
MOTOR. WARN DEALER
5
Brake fault
DRIVING NOT
POSSIBLE
CHECK IF FREEWHEEL IS DISCONNECTED
6
Gas pot not in neutral at
power up
DRIVING NOT
POSSIBLE
CONTACT DEALER
7
Speed pot error
DRIVING NOT
POSSIBLE
CONTACT DEALER
8
Motor volts error
DRIVING NOT
POSSIBLE
CONTACT DEALER
9
Other internal error
DRIVING NOT
POSSIBLE
CONTACT DEALER
Charge plug
To charge the batteries use a charger which guards the process and is convenient to charge the fitted
batteries. Your battery charger should be equipped with a 3-pole plug which fits into the charging plug
in the tiller.
Making a transfer
Make sure the Navigator is always turned off and in freewheel position before making a transfer.
•
move the rotion lever upwards to unlock the chair (picture 32)
•
next, turn the chair 90º left or right. The chair will automatically lock on every 45º if you release
the rotation lever (picture 33)
•
take place on the chair and turn it back to the starting position. The chair is fitted with flip-
backward armrests. These can be flipped away to be able to make an easy side transfer. Always
make sure to flip the armrests back in the original position when seated.
Picture 32
Picture 33