6
LAST DOOR LOCKiNG/ARMiNG
This system can be configured to arm automatically when all the vehicle’s doors are closed (see
programmable feature #2). when all of the doors are closed after driving the vehicle, it will start a
30 second countdown (indicated by a fast flashing status light). After 30 seconds, the system will
lock/arm. During the 30 second arming delay, if a point of entry is opened, the countdown will pause
until all entry points are closed again. Turning On the ignition key will cancel the last door arming
sequence until the key is turned off and the doors are all closed once again.
Security System Features
AUTOMATiC RE-LOCKiNG
This automatically re-locks the doors if the system is disarmed from the remote. (see programma-
ble feature #3). when unlocked by remote (the included remote OR your factory remote), the system
will start a 90 second countdown (fast flashing red status light) to re-lock the system. This is useful if
the controller accidentally disarms the system when it’s kept in a purse or pocket where other items
could potentially press the buttons.
Using The Valet Switch
EMERGENCy OVERRiDE
if you were to lose or break your controller, you’d need to perform an emergency override to disarm
the system. To do so, use the following steps:
STEP 1 -
Enter the vehicle (the alarm may sound)
STEP 2 -
Turn the ignition key to the “On” position
STEP 3 -
Press the valet switch (located in the window-mount antenna) once
STEP 4 -
Turn the ignition “OFF”.
The valet switch is a push button built into the window mount antenna. it is used to perform emer-
gency override and system programming (see inside of back cover for programming).
