background image

7

The Status Light

  The status lights, located in the window-mount antenna, provide a visual indication of the system’s 

status via gREEn (remote start status) and RED (alarm status) lights.

SECURiTy SySTEM STATUS (RED LiGHT):

OFF:

 The system is unlocked and not performing any automatic functions.

FLASHiNG SLOw: 

The system is locked and monitoring all entry points.

FLASHiNG FAST: 

One of the automatic locking/arming features is in progress.

AUTOMATiC TRANSMiTTER VERiFiCATiON (RED LiGHT):

When you turn the ignition on, the status light will flash equal to the number of transmitters pro

-

grammed to the system. This protects you from potential thieves (valet, mechanic, installer, etc.) that 

might add their own transmitter without your knowledge and accessing your vehicle and it’s contents 

at a later time.

ZONE ViOLATiON RECALL (RED LiGHT):

  If a zone is violated while the system is locked/armed, the RED status lights will flash a number of 

times to indicate exactly which zone(s), has been violated. it will store the last 2 violated circuits and 

continually repeat the flash pattern until the system is disarmed & the ignition key is turned ON. 

2 FLASHES:

 Hood trigger

3 FLASHES: 

Door trigger

REMOTE START STATUS (GREEN LiGHT):

OFF:

 The remote start is off and in standby mode.

FLASHiNG SLOw: 

Remote start is activated.

Summary of Contents for RF-10-EDP













Reviews: