TO MANUALLY CHANGE FEATURES:
Step 1
Turn the ignition key “ON”, then “OFF”�
Step 2
Within 5 seconds of step 1, press the valet switch 5 times to access user features (Press
10 times to access installer features)�
~ The siren/horn will sound and the status light will turn on�
Step 3
Within 10 seconds of step 2, press the valet switch the number of times corresponding
with the desired feature’s number�
~ The siren/horn will chirp equal to the selected feature�
Step 4
4-button & 2-way MODELS:
Change the feature by pressing the transmitter button that cor-
responds with the desired setting�
1-button MODELS:
Change the feature by pressing the transmitter button OR brake pedal the
same number of times that corresponds with the desired setting (make all presses before hearing
any chirps)�
NOTE: some cars require the ignition to be on for the brake circuit to operate. In
this case, turn on the ignition before pressing the brake.
~ The siren/horn will chirp equal to the selected setting�
Step 5
If you wish to change more features, repeat steps 3 & 4 at this time�
Step 6
To exit programming, turn the ignition key “ON” then “OFF”� Or, it will exit automatically
after 10 seconds of no activity�
RESTORING FEATURE SETTINGS TO FACTORY DEFAULT:
Step 1
Enter Installer Feature programming (DO NOT SELECT ANY FEATURES)�
Step 2
4-button & 2-way MODELS:
Press LOCK + UNLOCK (or BRAKE x 5)
1-button MODELS:
Press the START button 5 times (or BRAKE x 5)
~ The siren/horn will sound to indicate reset and exit programming
This device complies with FCC Rules part 15� Operation is subject to the fol-
lowing two conditions, (1) This device may not cause harmful interference and,
(2) This device must accept any interference that may be received, including
interference that may cause undesired operation�
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the
user’s authority to operate the equipment�
A matrix of all programmable features and their options are on the next page� For detailed
information on each feature, please refer to the operation manual� Use the procedure below to
make any necessary changes�
NOTE: You can program features via your computer with Omega Weblink.
Visit www.omegaweblink.com for more information.
PROGRAMMING FEATURES
Programmable Features
14
