Regardless of method used to Arm the alarm, once Armed, the alarm will monitor
all protected zones, and if an intrusion attempt is detected it will activate, or
“trigger”.
A trigger consists of the following:
• The electronic siren, or optionally the vehicle’s horn, will start sounding.
• The exterior parking lights will fl ash on and off repeatedly.
An activation has a 30 second duration unless the system is disarmed using the
remote control or the Valet /Override switch. If all protected zones are secure
at the end of the trigger, the system will stop and rearm itself to detect further
entry attempts. If a protected zone is still open at the end of the trigger cycle,
the alarm will continue to re-trigger itself for up to six activated cycles before it
resets itself and ignores the violated zone.
Should it be needed in a threatening situation, or you feel the need to attract at-
tention, the alarm can be triggered using the remote control. Your alarm features
“Panic Mode”, which allows you to activate “Panic” from the “Arm/Lock” button.
To Activate Remote Panic:
Press & Hold the “Arm/Lock” Button,
for 3 seconds, with the ignition “Off”.
The shock sensor & Prewarn zone can be by-passed using the remote
control.
This may be useful in stormy weather.
1) Arm the alarm by, Pressing & Releasing the “Lock” button.
2) Within 2 seconds, Press & Release the
“3rd”
button.
- The siren will chirp once to confi rm sensor has been by-passed.
- Upon Disarming the alarm, the sensor zone will reset.
Sensor By-pass
System Armed & Activated
Remote Panic Operation
Page 5
Then
1
.
2.
THE SIREN WILL SOUND
THE PARKING LIGHTS
WILL FLASH
Hold 3 seconds
Summary of Contents for AL-560
Page 34: ......
