Excalibur AL-1660-EDPB, Operation Manual

Page: 12 / 20

user Programmable Features
Feature #6 - Open Door Bypass of ignition Locking
On
(press “
lock
” button to program)
- DEFAuLT
Off (press “ unlock ” button to program)
This feature cancels the automatic locking or unlocking of the vehicle’s doors if one of
the doors is open when the ignition switch is turned on or off�
Feature #5 - ignition Controlled Lock/unlock
Off (press “ lock ” button to program) - DEFAuLT
Lock w/ ignition On (press “ unlock ” button to program)
unlock w/ ignition Off (press “ trunk ” button to program)
Lock And unlock w/ ignition (press “ start ” button to program)
This feature controls the lock/unlock operations when the ignition key is turned on/off,
Feature #1 - Remote Start Run Time
10 minutes (press “ lock ” button to program) - DEFAuLT
5 minutes (press “ unlock ” button to program)
15 minutes (press “ trunk ” button to program)
20 minutes (press “ start ” to program)
This sets the maximum amount of time that the remote start will keep the engine
running if it is not shut down by other methods�
Feature #3 - Confirmation Chirp Volume
Low (softest)
(press “
lock
” button to program)
medium Low
(press “
unlock
” button to program)
medium high (press “ trunk ” button to program) - DEFAuLT
high (loudest) (press “ start ” button to program)
This feature allows the choice different chirp volume levels, and when programming
it, each selection will be confirmed in the chosen volume making it easy to choose the
most suitable setting�
Feature #4 - BROWn Wire Audible Output
Pulsed horn Low
(press “
lock
” button to program)
- DEFAuLT (RS-360-EDPB)
Pulsed horn medium (press “ unlock ” button to program)
Pulsed horn high (press “ trunk ” button to program)
Steady Siren (press “ start ” button to program)
- DEFAuLT (AL-1660-EDPB)
This changes the BROWN wire’s audible output when the alarm is triggered� Steady
siren must be selected when using a siren (other horn outputs stay at the Medium
setting)� The horn honk options will affect all horn honk outputs used as well as
change the BROWN wire’s function�
Feature #2 - Flashing Light Confirmations
unlock: On, RS: On (press “ lock ” button to program)
unlock: On, RS: Flash (press “ unlock ” button to program)
unlock: Flash, RS: On (press “ trunk ” button to program)
unlock: Flash, RS: Flash (press “ start ” button to program) - DEFAuLT
This feature affects the parking light confirmations for system unlock & remote start
functions� With the above options, you can select any combination of:
unlock: Flash - Flashes twice after unlock
unlock: On - Flashes twice then stays on for 30 seconds after unlock
RS: On - Stays on during remote start mode
RS: Flash - Flashes once every 1�5 seconds during remote start mode
12