4) On 1890/1990 CCS drills where the rear rank is being equipped with UniForce, swap out the
OEM bracket that holds the electrical box for Exapta’s (see Photo H). This must be done for
clearance when folding.
5) Carefully fold the drill’s wings, making sure the trays don’t hit each other. Now, tighten the
flange locknuts holding the trays in place.
Photo G. RH wing, rear tray, outer end (40'
1890). Button-head bolts need to be tightened
yet. Header hose is already installed & lying
across the U-bracket here. 1895 is slightly
different at this location.
Photo F. LH wing,
rear tray, inner end on
1890. Thru-bolt not yet
installed here.
Photo H. On CCS drill when
rear rank gets UniForce.
