Exalt Installation and Management Guide
ExtendAir (TDD) Series
203591-004
23
2010-09-20
LED Indicators
Table 3 provides details of the LED indicators on the ExtendAir (TDD) Series radios. Note that there
are two LEDs, labeled top and bottom, associated with each connector. See
information on how the Exalt GUI displays LED status.
Table 2 Connectors
Connector
Description
SYNC/RSL
(1) Sync out feature is not implemented as of this writing.
(2) Antenna alignment RSL voltage (during installation)
TDM 2&4
Ports for up to two user T1 or E1 circuits to traverse link, port numbers 2 and 4.
TDM 1&3
Ports for up to two user T1 or E1 circuits to traverse link, port numbers 1 and 3.
Power/ETH1
Connected cables traverse to the power injector (Data+Power side), and provide the following
functions:
•
Primary ports for user Ethernet data (10BaseT or 100BaseT) to traverse link
•
DC power from power injector
ETH2 and ETH3
Ports for additional Ethernet connections, management and/or traffic. (xx05 models only).
(Ground)
Threaded (M5) receptacle.
Use a connector cover on all unused connectors for weatherproofing. The connector covers
are included in the accessory kit. Use a safety ring on each connector to secure the connector
covers.
