Exalt EX-11s, Installation And Management Manual

Page: 40 / 103

Exalt Installation and Management Guide
s-Series Digital Microwave Radios
32 201511
2008-02-27
Navigating the GUI describes each page of the GUI. Most configuration parameter settings are
intuitive. The following link parameters must match at both ends for the link to communicate:

Link Security Key (Administration Settings page)

Bandwidth (System Configuration page)

Mode (System Configuration page)

RF Frequency – exactly opposite of one another (System Configuration page)
Note: Changing any of these parameters causes a temporary loss of link. The GUI displays a
warning and provides an opportunity to cancel changes.
Navigating the GUI
The GUI provides the primary interface for all configuration and management. There are three
sections of the main GUI window:

Summary status information section (upper-left corner)

Navigation panel

Main window
Figure 18 Exalt GUI window description
Summary Status Section
This section of the Exalt GUI provides a review of the system status.
In the screens in Figure 19, the top bar illustrates the alarm condition of the link. The information
inside the bar is equivalent to the entry of the Link Name set by the administrator in the
Administration Settings Page .
The color of the panel indicates alarm status:

Green indicates the system is communicating and all functions are normal

Yellow indicates a minor non-traffic affecting alarm condition

Red indicates a major traffic affecting alarm condition
MAIN WINDOW
NAVIGATION
PANEL
SUMMARY
STATUS