Extra equipment
English
18
Factors influencing blade lifespan:
Pipe material
Blade suitability for the pipe material
Correct motor speed setting
Pipe wall thickness
Feed rate
Smoothness of the pipe
General user knowledge
Cleanliness of the pipe
Corrosion on pipe
Weld seam on the pipe
Blade speed
Factors influencing straightness of cutting:
Blade condition
Pipe wall thickness
Feed rate
Smoothness of feed
General user knowledge
Cleanliness of the pipe
Pipe circumference
Too loose or tight gripping device
Too tight blade
Extra equipment
Blade cover with vacuum cleaner connection.
This blade cover is equipped with a connection for
standard vacuum cleaners. Recommended to use
when cutting plastic or materials that produce dust.
FIGURE R
Additional attaching chain segments
When cutting of larger pipes is required, capacity
beyond 1850mm can be achieved with additional
chain segments. Chain segments are available in
2m pieces. These segments, together with the
supplied segments, will allow attaching Exact Infinity
to all pipe sizes.
Blade suitability
Exact TCT:
Suitable for cutting steel and all kinds of
plastic pipe material
Exact Cermet:
Suitable for cutting stainless steel
and acid proof materials, steel, copper, aluminum
and all kind of plastic pipe materials.
Exact ALU:
Suitable for cutting aluminum and all
kinds of plastic.
Exact Diamond:
Suitable only for cutting cast and
ductile iron pipe materials, also for concrete lined
cast iron pipes.
Exact TCT 140
Exact Cermet 140
Exact ALU 140
Exact Diamond X 140
Exact TCT 165
Exact Cermet 165
Exact ALU165
Exact Diamond X 165
Exact Cermet 180
Exact ALU 180
Exact Diamond X 180
Due to continuous product development, the manual may be updated.
No changes will be reported separately.
For more information check www.exacttools.com
Summary of Contents for PipeCut Infinity
Page 2: ...Intentionally left blank...
