Manual FRAME-PF-UNI-PORAD
Version 1.2
03.04.2020
Page 5 of 19
Make sure that only the corresponding projector frames are installed with
this Portrait Adapter! Do not try to use it with other projector frames
because serious accidents can occur!
WARNING
Installation work should only be carried out by a qualified technician.
If this product is not installed correctly, serious accidents may result.
Do not use the Portrait Adapter outdoors.
This product is made only for indoor usage. If the Portrait Adapter is
installed outdoor there are many influences like wind or rain that can have
an effect on the stability of the whole system. This can cause serious
accidents and property damage.
Do not hang the Portrait Adapter on unstable structures.
If the Portrait Adapter is hanged on an unstable structure, the entire
system can fall down and injuries may occur. Make sure that the
construction on which the Portrait Adapter is hanged can support a total
weight of 200 kg
2
(440.924 lbs.).
Make sure to not exceed the maximum weight load limits (WLL)
The maximum weight load limit for FRAME-PF-UNI-PORAD is 60Kg (132.27
lbs) if you are using the M6 screws, and 150Kg (330,69 lbs) if you are using
the M8 screws. Refer to chapter 5 Assembling the portrait adapter with EVO-
LINK-200 for detailed information
For suspended installations, use only designated hanging accessories, like
EVO-LINK-200 series.
2
Note that the maximum weight load limit for FRAME-PF-UNI-PORAD is 60 Kg if using M6 screws and 150Kg if
using M8 screws
