Manual FRAME-PF-UNI-PORAD
Version 1.2
03.04.2020
Page 16 of 19
Step 3: Move the rigging clamps together with
the four stainless steel plates until the desired
position is reached and then tighten back the
two M10 DIN 980 safety nuts with a torque of
50 Nm.
Step 4: Attach the Portrait Adapter to the frame and tighten back the eight M8
nuts of the rigging clamps using the Nr.13 screw wrench.
Please make sure that
the nuts are properly tightened, otherwise accidents can occur!
Projection direction
