Manual FRAME-PF-UNI-PORAD
Version 1.2
03.04.2020
Page 13 of 19
Step 2: Move the rigging clamps together with the four stainless steel plates until
the desired position is reached and then tighten back the four M10 DIN 980
safety nuts with a torque of 50 Nm. Please move the rigging clamps and the
stainless-steel plates in such a way that when the desired position is reached,
they are symmetric toward the centre of the Portrait Adapter
The distances between the rigging clamps and the compatibility with the below
listed frames are as follows:
Frame name
Distance between two clamps
FRAME-EVO-P10
265 mm / 10.433 In
FRAME-EVO-E10
265 mm / 10.433 In
FRAME-EVO-P14
275 mm / 10.826 In
FRAME-EVO-P20
337 mm / 13.267 In
7.
Attaching the portrait adapter to FRAME-EVO-P10/ P20
Step 1: Unscrew the eight M8 nuts and open the four rigging clamps jaws.
8 x M8 Nut
