Exaco VICTORIAN VI 46, Assembly Instructions Manual

Page: 8 / 42

Note: When assembling the foundation
in this step , only hand- tighten the nuts.
The corners may need to be slightly
loose to attach the corner uprights .
Note: Before assembling the
foundation , insert ( 3 ) M6x15
b olts as shown for the sliding
door guide.
See page S1.
Suggestion: If the unit is to be installed
on a concrete foundation you will need
to cut PRO210 flush with the bottom of
PRO6120.
You can lay the cut off PRO210 pieces
on their side and use them to secure the
PRO6120 to the concrete foundation.