P
RODUCT
I
NFORMATION
Dear customer
,
Thank you for buying a high-quality aluminium greenhouse.
R
EMARKS
The drawings in these instructions are for all basic models.
However, this manual should be sufficient to guide you
through the assembly of all sizes and variations of this
greenhouse.
This
greenhouse is designed for cultivation of
plants/flowers. Therefore leakage, water drops and
condensation inside the building are allowed. The building
should
only be entered by competent persons during
cultivation or maintenance. Aluminium profiles that are not
painted may show black stains, these stains are not a
production error: they can be easily removed with a
aluminium cleaner available at every good drugstore. The
rubber strips have been treated with oil/silicone on the
interior to facilitate the assembly. The
greenhouse can be
mounted on a solid concrete foundation or on a solid packed
surface with concrete anchors in the corners. The
solid
concrete foundation
should be
deep enough to get a solid
and frost-free ground.
The greenhouse should be anchored
securely and the anchors should be checked periodically.
During winter
it is necessary to clear the roof of snow or
su
pport
it
in a suitable way. The greenhouse should be built
in a location protected from strong winds. Protective gear
(such as protective gloves) should be used during
assembly
in order
to avoid injuries. One should
p
ay attention
at all
times and consult
the local
building regulations
.
A
SSEMBLY ORDER
The assembly procedure is the same for all our
greenhouses.
- Sort the profiles according the model.
-
Assemb
le
the complete aluminium
framework
.
- Level the
framed greenhouse
using a waterlevel.
- Secur
e
the building to the ground
-
Install
glass/
glazing panels.
R
EQUIRED TOOLS
10mm Socket Wrench
10mm Spanner Wrench
Water-level
Phillips screwdriver
Powered Drill + 4.2mm or 11/64ths Drill Bit Scissors (to cut
the rubber).
We reserve the right to change the construction without
prior notice!
Summary of Contents for VICTORIAN VI 46
