Exaco VICTORIAN VI 46, Assembly Instructions Manual

Page: 19 / 42

Use a brace to push roof beams up
1" when installing supports. An
easy way to do this is with a 2"x4"
pice of wood. Measure from the
floor to the roof beam and add 1
inch, cut a 2"x4" piece of wood to
that length to brace it up while
installing supports.
You may need to use a drill to
create a notch in which to insert
neccesary bolts. Please do this
between where the two bolts will sit
so it will be covered with the
support.
Royal Victorian Roof Supports for Greenhouses over 17 feet long
Note: Your greenhouse may have come with either this style of support
or the one on the previous page.