Product Information
Dear customer,
Thank you for buying a high-quality
Junior
Victorian
aluminium greenhouse.
Remarks
In
the
drawings you
will
find the
assembly
instructions for all
standard
models.
However this manual
includes instructions for optional accessories and
should
provide
sufficient guidance for all special-case greenhouses. The aluminium
profiles may show black stains, these stains are not a production error. They can
be easily removed with a aluminium cleaner available at every good drugstore.
The rubber profiles have been treated with oil on the interior to facilitate the
assembly. The ground must be frost-free in order to place a concrete foundation.
During winter the roof has to be cleared of snow or supported in a suitable way.
The greenhouse should be built in a location protected from strong winds.
Protective gear (such as protective gloves) should be used during construction in
order to avoid injuries.
We recommend consulting your local building code to
determine the requirements in your area.
PLEASE NOTE:
ALL MEASUREMENTS ARE IN MILLIMETERS, WE RECOMMEND
WORKING WITH A METRIC TAPE MEASURE. We understand that you may be more
familiar
and comfortable
with measurement
s in inches and feet. H
owever this greenhouse
has been
manufactured in Belgium
using
metric measurements. Keeping the original metric
measurements allows for greater accuracy and reduces error. You should be able to find a
metric or combination tape measure at your local hardware store.
Also, in Europe a period is used in place of a comma (i.e. 2.000 mm is 2000 mm).
Assembly order
The assembly procedure is the same for all JUNIOR greenhouses.
- Sorting of the profiles according
to
the
style
-
Assemble the aluminum framing
- Level
the framed greenhouse using a
water-level.
-
Install glass.
Required tools
Metric tape measure
10mm Socket Wrench
10mm Spanner Wrench
Water-level
Phillips screwdriver
Powered Drill + 4.2mm or 11/64ths Drill
Bit
Scissors (to cut the rubber).
We reserve the right to change the construction without prior notice!
Summary of Contents for Junior Victorian
