Ex-Cell ZR2700 Operation Manual Download Page 5

5- ENG

D28001

• Reactive force of spray will cause

gun/wand to move, and could cause the
operator to slip or fall, or misdirect the
spray. Improper control of gun/spray
wand can result in injuries to self and
others.

• Do not overreach or stand on an unstable

support. Grip gun/spray wand firmly with
both hands. Expect the gun to kick when
triggered.

• If proper starting procedure is not

followed, engine can kickback causing
serious hand and arm injury.

• If engine does not start after two pulls,

squeeze trigger of gun to relieve pump
pressure. Pull starter cord slowly until
resistance is felt. Then pull cord rapidly to
avoid kickback and prevent hand or arm
injury.

• The spray gun/spray wand is a powerful

cleaning tool that could look like a toy to
a child.

• Keep children away from the pressure

washer at all times.

• Contact with hot surfaces, such as

engines exhaust components, could
result in serious burn.

• During operation, touch only the control

surfaces of the pressure washer. Keep
children away from the pressure washer at all
times. They may not be able to recognize the
hazards of this product.

• Spray directed at electrical outlets or

switches, or objects connected to an
electrical circuit, could result in a fatal
electrical shock.

• Unplug any electrically operated product

before attempting to clean it. Direct spray
away from electric outlets and switches.

RISK OF UNSAFE OPERATION

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Unsafe operation of your pressure washer

could lead to serious injury or death to
you or others.

• Do not use chlorine bleach or any other

corrosive compound.

• Become familiar with the operation and con-

trols of the pressure washer.

• Keep operating area clear of all persons,

pets, and obstacles.

• Do not operate the product when fatigued

or under the influence of alcohol or drugs.
Stay alert at all times.

• Never defeat the safety features of this

product.

• Do not operate machine with missing,

broken, or unauthorized parts.

• Never leave spray wand unattended while

unit is running.

RISK OF ELECTRICAL SHOCK 

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

RISK OF HOT SURFACES

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

Summary of Contents for ZR2700





















Reviews: