Ex-Cell ZR2700 Operation Manual Download Page 3

3- ENG

D28001

IMPORTANT SAFETY INSTRUCTIONS

Read Operation Manual. Do not operate equipment until you
have read Operation Manual for Safety, Assembly, Operation,

and Maintenance Instructions.

RISK OF EXPLOSION OR FIRE

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

• Spilled gasoline and it’s vapors can be-

come ignited from cigarette sparks,
electrical arcing, exhaust gases, and hot
engine components such as the muffler.

• Shut off engine and allow it to cool before

adding fuel to the tank.

• Use care in filling tank to avoid spilling fuel.

Move pressure washer away from fueling area
before starting engine.

• Heat will expand fuel in the tank which

could  result in spillage and possible fire
explosion.

• Keep maximum fuel level ½” below top of

tank to allow for expansion.

• Operating the pressure washer in an ex-

plosive environment could result in a fire.

• Operate and fuel equipment in well ventilated

areas free from obstructions. Equip areas with
fire extinguisher suitable for gasoline fires.

• Materials placed against or near the pres-

sure washer can interfere with its proper
ventilation features causing overheating
and possible ignition of the materials .

• Never operate pressure washer in an area

containing dry brush or weeds.

• Muffler exhaust heat can damage painted

surfaces, melt any material sensitive to
heat (such as siding, plastic, rubber, or
vinyl), and damage live plants.

• Always keep pressure washer a minimum of

four feet away from surfaces (such as houses,
automobiles, or live plants) that could be dam-
aged from muffler exhaust heat

• Improperly stored fuel could lead to acci-

dental ignition. Fuel improperly secured
could get into the hands of children or
other unqualified persons.

• Store fuel in an OSHA approved container,

in a secure location away from work area.

• Use of acids, toxic or corrosive chemicals,

poisons, insecticides, or any kind of flam-
mable solvent with this product could re-
sult in serious injury or death.

• Do not spray flammable liquids.

• Breathing exhaust fumes will cause serious

injury or death!

• Operate pressure washer in a well ventilated

area. Avoid enclosed areas such as garages,
basements, etc.

• Never operate unit in a location occupied by

humans or animals.

• Some cleaning fluids contain substances

which could cause injury to skin, eyes, or
lungs.

• Use only cleaning fluids specifically recom-

mended for high pressure washers. Follow
manufacturers recommendations. Do not
use chlorine bleach or any other corrosive
compound. 

RISK TO BREATHING

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

READ AND SAVE THESE INSTRUCTIONS

Summary of Contents for ZR2700





















Reviews: