background image

6- ENG

D27935

The powerful spray from your pressure washer is capable of causing
damage to surfaces such as wood, glass, automobile paint, auto

stripping and trim, and delicate objects such as flowers and shrubs. Before spraying,
check the item to be cleaned to assure yourself that it is strong enough to resist damage
from the force of the spray. Avoid the use of the concentrated spray stream except for
very strong surfaces like concrete and steel.

Operating without flow of water will result in equipment damage. Operating the pressure
washer with water supply shutoff will void your warranty. You should never run this pres-
sure washer for more than 2 minutes without pulling the trigger to allow cool water to
enter the pump and the heated (recirculated) water to exit. 

RISK OF INJURY FROM SPRAY

HAZARD

WHAT CAN HAPPEN

HOW TO PREVENT IT

• High velocity fluid spray can cause

objects to break, propelling particles at
high speed.

• Light or unsecured objects can become

hazardous projectiles.

• Always wear ANSI approved Z87 safety

glasses.Wear protective clothing to protect
against accidental spraying.

• Never point wand at, or spray people or

animals.

• Always secure trigger lock when wand is not

in service to prevent accidental operation.

• Never permanently secure trigger in pull

back (open) position.

CONSUMER GENERAL AND SERVICE INFORMATION

DO NOT RETURN THIS PRODUCT TO THE RETAILER! 

FOR SERVICE OPTIONS CALL: 1-800-888-2468

• Congratulations!  You have purchased a high quality product from America’s leading

manufacturer of pressure washers.  This pressure washer, when properly used and
maintained, will provide trouble-free service.  Please read and follow these instructions for
proper use and maintenance.

• Please take the time now to register your pressure washer online at

www.excellpressurewasher.com.

• All sales of pressure washers are final. Do not return this product to the retailer.

• If you experience any problems and need assistance, please call us at our toll-free

number 

1-800-888-2468, Monday through Saturday, 8:00 a.m. To 6:00 p.m. Central Time.

• If repair or service part purchase is required, our many Authorized Warranty Service

Centers are conveniently located and equipped to handle all in-warranty and out-of-
warranty service.

• For the location of the nearest Authorized Warranty Service Center call 1-800-888-2468,

24 hours a day, 7 days a week or visit our web site at www.excellpressurewasher.com.

• All pressure washers carry a manufacturer's one year warranty from date of purchase for

consumer use and a 90 day warranty for commercial use.

• Retain sales receipt as proof of purchase for warranty service.

Read and understand all safety warnings.

• Do not operate this unit until you have read and understand this Operation Manual for

Safety, Operation, and Maintenance Instructions.

• Do not operate this unit until you have read and understand the Engine Owners Manual

for Safety, Operation, and Maintenance Instructions.

Summary of Contents for VR2300













































Reviews: