FR
DE
IT
UK
NL
PL
6
SPECIFICATIONS
Model
ROBO 2000W MUSIC
Part number
RB2M
Power
2000W
Speaker power
3W
Remote control
Yes – with CR2025 battery
Oscillation
Yes
Timer
8H
Handle
Yes
Overheating protection
Yes
Frost protection
Yes
Anti-tilt protection
Yes
Voltage
220 - 240 V~
Frequency
50 HZ
Product dimensions (LxDxH)
L24 x D24 x H64 cm
Product weight
2.68 kg
INSTRUCTIONS FOR USE
BEFORE USING APPLIANCE FOR THE FIRST TIME
1. Please read these instructions carefully before using the
appliance and keep them for future use.
2. Check that the voltage of your local electricity network
complies with the one which appears on the appliance.
3. Before using the appliance for the first time, remove the
appliance’s protective films or stickers.
4. Please check that switches on the side are on OFF
position.
When the appliance is plugged in, press the button (7) to
switch it on.
The appliance will select 25°C as the default temperature.
The heater will then be in standby mode. Press the
button to switch it on and activate the touch function of the
other buttons on the control panel.
MODE CONTROL
When the appliance is switched on, the default operation
mode will be Fan
mode.
Press the
button to change the mode.
Press it once to switch to Heating mode on speed 1 (low
heating) and the screen will display
.
Press it twice to switch to Heating mode on speed 2 (high
heating) and the screen will display
Press it three times to return to Fan mode and the screen
will display
.
TIMER
Press the button to set the timer and programme when
the appliance should stop functioning. The timer can be set
for a period of up to 8 hours with 1-hour intervals.
When the timer is activated, the indicator light will switch
on.
To stop the timer, press until the timer indicator reaches
0 hours.
OSCILLATION ON/OFF
The allows you to switch oscillation of the appliance on
or off. When oscillation is switched on, the will be lit up on
the LED display screen.
WIRELESS CONNECTION
This mode allows the appliance’s speaker to be connected
to a smartphone or a tablet via wireless connection, allowing
you to listen to music or the radio.
Press the
symbol on the control panel.
Select the name of the appliance “EWT RB2M” on your
smartphone or tablet.
Once the connection has been established, start and control
music or the radio on your smartphone or tablet.
REMOTE CONTROL
A. Appliance On/Off
B. 8H Timer
C. Oscillation mode
D. Control of heating and
fan modes
E. Decrease
F. Increase
G. Wireless connection
control
1. When inserting or removing the battery, please consult
the diagram below. Pay attention to the guide on the lid
explaining the positioning of the positive and negative
symbols on the battery.
2. Remove the protective cover from the battery slot of your
remote control and place the 3V CR2025 inside.
3. Avoid dropping the remote control or allowing it to fall to
the floor.
4. Batteries contain materials that are dangerous for the
environment. When disposing of the appliance, the
batteries must be removed from the remote control and
disposed of in an appropriate place - Please refer to
recycling section.
CLEANING AND MAINTENANCE
Switch off the appliance first and disconnect the plug from
the socket.
• Clean the housing with a moist cloth, vacuum cleaner or
brush.
• Do not use any abrasive or caustic cleaning agents.
• Do not use any flammable cleaning agents e.g. petrol or
spirit for cleaning the appliance.
• Never immerse the appliance in water.
• Air inlet and outlet area should be cleaned with a vacuum
cleaner regularly·
• If the appliance is not used for extended periods, it must
be protected against excessive dust and dirt.
RECYCLING
exist. Check with your Local Authority or retailer for recycling
advice in your country.
Batteries should be disposed of or recycled in accordance
with WEEE Directive 2012/19/ EU. Packaging should be
recycled where possible.
RB2M.indd 6
11/06/19//24 13:57
