FR
EN
NL
8
power cable. Risk of electric shock and damage.
• Switch the appliance off before unplugging it.
• Never place the equipment just below a wall plug
or junction box.
• The appliance must be stored in a dry place,
away from any sources of dampness and at a
temperature of between 15°C and 25°C.
• Never immerse the appliance in water and never
place it on water or any other liquid. Unplug the
appliance immediately if it becomes damp or wet.
• Never use the appliance when you have wet or
damp hands.
• Only use the appliance inside (indoors) and only
for the purpose it was designed.
• Do not leave the appliance switched on without
supervision.
• Do not place any objects on top of the appliance.
• Do not sit on the appliance.
• To avoid the risk of damage or a dangerous
situation do not use this appliance or position
any part of it near to heat, open flame, cooking
appliances or any heating appliance.
• Always use the appliance in a vertical position.
• Be careful of the potential damage that can be
caused by the appliance’s sharp edges.
• Ensure that furniture, curtains or other
combustible materials are placed more than one
(1) metre from the appliance.
• Always unplug the appliance before cleaning it.
• WARNING: Do not cover the appliance. Do not
place any materials or clothes on the appliance or
impede the circulation of air around the appliance.
• DO NOT BLOCK THE VENTILATION! Regularly
check that the air intakes and outlets are not
obstructed.
• Do not put any objects through the protective grill
(finger, pen, tool…)
• Never use the appliance if the protective grills
are not fitted in compliance with the assembly
instructions.
• Do not remove the protective grill for cleaning.
• Do not place the air intake close to walls or
curtains (1m). Obstruction of the air flow may
reduce the appliance’s efficiency.
• WARNING: To avoid the risk of accidental
strangulation from the supply cord all children
and vulnerable people must be supervised when
in the vicinity of the product whether it is working
or not.
• WARNING: To avoid danger of suffocation please
remove all packaging materials particularly plastic
and EPS and keep these away from vulnerable
people, children and babies.
Electrical connection
WARNING: this appliance must be earthed
Only plug the appliance onto a 230-volt alternating
current power supply (respect the indications on the
identification plate) and to an electrical installation
which complies with the relevant standards. Please
read the safety and installation instructions carefully
prior to switching the appliance on.
SPECIFICATIONS
Model
Power
Number of speeds
Oscillation
Tilt adjustment
Oscillation switch
Number of blades
Blade material
Grill material
Grill diameter
Removeable grill
Handle
Voltage
Frequency
Product
Product weight
BEFORE FIRST USE
1. Please read these instructions carefully before using the
appliance and keep them for future use.
2. Check that the voltage of your local electricity network
complies with the one which appears on the appliance.
3. Before
appliance’s protective films or stickers.
ASSEMBLY
1. Place the bracket into vertical position. Attach the motor (7)
to the bracket (11) using the mounting screw (12).
2. Unscrew the blade centre cap (2) by turning it in a clockwise
direction. Unscrew the safety nut (4) of the motor shaft (6)
by turning it in an anti-clockwise direction.
3. Attach the back grill (5) to the motor shaft (6) making sure
that you align the three holes with the three mounting stubs
located at the front of the motor. Attach the back grill using
the safety nut (4) by turning it in a clockwise direction.
4. Attach the fan blade (3) to the motor shaft (6). Tighten
the blade centre cap (2) by turning it in an anti-clockwise
direction. (Important: make sure that the blade centre cap
(2)
(6).
5. Unscrew the mounting screw (14) located on the bottom of
the grill.
6. Assemble the front grill (1) and the back grill (5) by placing
the hook (15) at the top. Tighten using the locking latches
located all around the grill and screw in the small mounting
screw on the bottom of the grill (14) for your safety. Ensure
that all elements are correctly attached.
Oscillor_40C_A4.indd 8
Oscillor_40C_A4.indd 8
11/12/19 11:11
11/12/19 11:11
