Design and function
Transport and installation
099-008825-EW501
12.02.2019
13
Figure 5-5
Item Symbol
Description
0
1
Transport bar
2
Allen screw
3
Plain washer
4
Hexagon nut
• Mount transport bar with fastening material and wire feeder machine support.
5.3
Transport and installation
WARNING
Risk of injury when lifting by crane!
When lifting the machine by crane, persons may be severely injured by falling machines
or mount-on components!
• Remove any supply lines and accessories before lifting by crane (e.g. hose package, wire
spool, shielding gas cylinder, toolbox, wire feeder, remote control, etc.)!
• Avoid jerky movements!
• Properly close and lock all casing covers and protective caps before lifting by crane!
• Ensure that the load is distributed evenly! • Use chain hoists and chain slings of the same
length only!
• Stay outside the danger zone underneath the machine!
• Use the correct number of hoisting equipment of the right size in the correct position!
Observe the crane principle
> see 5.3.1 chapter
!
• Follow the regulations for occupational safety and accident prevention of the respective
country!
CAUTION
Improperly secured equipment!
Equipment, equipment combinations and accessories incorrectly fastened onto
transport systems can tip over during transport and cause injuries!
• Only used the original parts supplied to fasten the equipment.
• Use the systems only for transporting the machines
> see 3.2 chapter
.
• Check the fixing points before each transport and at regular intervals.
