Design and function
Attach the system component to the transport cart
099-008632-EW501
05.12.2019
13
5.3
Attach the system component to the transport cart
CAUTION
Improperly secured equipment!
Equipment, equipment combinations and accessories incorrectly fastened onto trans-
port systems can tip over during transport and cause injuries!
• Only used the original parts supplied to fasten the equipment.
• Use the systems only for transporting the machines
> see 3.1 chapter
.
• Check the fixing points before each transport and at regular intervals.
This transport system is designed to accommodate modular device systems.
The standard version allows the fitting of up to two system components (e.g. power source and
cooling module or an identical module) to the transport cart. The modules are attached to the
transport cart using device-dependent support brackets and the height-adjustable cross arm.
Attaching added options allows the combination of further devices or modules
> see 5.1 chapter
.
Figure 5-4
Item Symbol
Description
0
1
Support bracket (BK260)
Lower device attachment (Picomig 185, -355; Phoenix 355, -405, -505;
Taurus 355, -405, -505; cool50)
2
Support bracket (BK210)
Lower device attachment (Picotig 200 AC; Tetrix 230; cool40, -41)
3
Machine support
• Unscrew the support bracket.
The further use of the support bracket depends on the system components to be used (please note
the device assignment of the support bracket BK260/BK210). The attachment with the front and rear
support brackets BK260 is shown below as an example.
