Machine description
Machine control
– Operating elements
099-004854-EW501
19.02.2014
23
Item Symbol
Description
0
4
Select seam type button
Fillet weld
Butt joint
Fillet weld - lap joint
Vertical-down
5
Operating mode button
spotArc / Spotmatic (spot time setting range)
Non-latched
Latched
6
TIG pulse welding
TIG automated pulses (frequency and balance)
TIG pulses with times, green light /
Fast TIG DC pulses with frequency and balance, red light
TIG AC special
7
Synchronisation types key button (two-sided, simultaneous welding)
Synchronisation via mains voltage
Synchronisation via cable
8
Gas test/rinse hose package button
see "Shielding gas setting" chapter
9
Error/status indicators
Collective interference signal light
Water deficiency signal light (welding torch cooling)
Excess temperature signal light
safety sign signal light
10
Display switching button
Material thickness display
VOLT
Welding voltage display
JOB
JOB number display
PROG
Program number display
11
Welding parameter setting rotary transducer
Setting of all parameters such as welding current, sheet metal thickness, gas pre-flow
time, etc.
12
Three-figure LED display
Welding parameter display (see also chap. “Welding data display”).
13
Status displays
After each completed welding task, the last values used in the welding
process for the welding current and welding voltage are shown on the
displays, and the signal light will be on
Direct current welding
Alternating current welding
and
simultaneously: Alternating current welding, AC special
14
Function sequence (see next chapter)
