Design and function
Welding torch cooling system
099-000159-EW501
16.08.2016
25
5.7
Welding torch cooling system
5.7.1
Welding torch cooling unit connection
Please note the relevant documentation of the accessory components.
Figure 5-7
Item Symbol Description
0
1
8-pole connection socket
Cooling unit control lead
2
4-pole connection socket
Cooling unit voltage supply
3
Cooling module
Control and supply lead to the welding machine
The cooling module and welding machine are connected using two leads.
• Insert the control lead plug on the welding machine.
• Insert the power supply lead plug on the welding machine.
5.8 Welding
data
display
The following welding parameters can be displayed before (nominal values), during (actual values) or
after welding (hold values):
Parameter
Nominal values
Actual values
Hold values
Welding current
Welding voltage
Welding power
When the hold values are displayed after welding and the settings are then changed (e.g. welding
current), the display will switch to the relevant nominal values.
not possible
possible
