Design and function
TIG welding
34
099-000229-EW501
14.04.2015
5.7.5
Welding data display
The following welding parameters can be displayed before (nominal values) or during (actual values)
welding.
Parameter
Before welding
(nominal values)
During welding
(actual values)
Welding current
Welding voltage
JOB number
Parameter times
Parameter currents
possible
not possible
5.7.5.1 Welding parameter setting
The parameters that can be set in the function sequence of the machine control depend on the selected
welding task. This means that if for example you have not selected a pulse variant, then you cannot set
any pulse times in the function sequence.
5.7.5.2 Welding current display (ignition, secondary, end and hotstart currents)
The welding currents for secondary current, ignition current and end current (expert menu) can be
displayed as percentages (factory setting) or absolute values on the machine display.
ENTER
+
EXIT
NAVIGATION
l
0
Figure 5-10
Display
Setting/selection
Exit the menu
Exit
Machine configuration
Settings for machine functions and parameter display
Welding current display (ignition, secondary, end and hotstart currents)
• Pro = welding current display as a percentage of the main current (factory setting)
• Abs = absolute welding current display
